PRTG Manual: SNMP NetApp System Health Sensor
The SNMP NetApp System Health sensor monitors the status of a NetApp storage system via the Simple Network Management Protocol (SNMP).
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: SNMP NetApp Systeemstatus
- French: NetApp état du système (SNMP)
- German: SNMP NetApp Systemzustand
- Japanese: SNMP NetApp システム正常性
- Portuguese: Saúde do sistema NetApp (SNMP)
- Russian: Работоспособность системы NetApp по SNMP
- Simplified Chinese: SNMP NetApp 系统健康状况
- Spanish: Salud de sistema NetApp (SNMP)
Consider the following remarks and requirements for this sensor:
Remark |
Description |
---|---|
IPv6 |
This sensor supports IPv6. |
Performance impact |
This sensor has a very low performance impact. |
Limits |
This sensor has predefined limits for several metrics. |
NetApp System Health |
If you use NetApp cDOT 8.3 or NetApp ONTAP as of version 9.0 or later, we recommend that you use the NetApp System Health sensor. |
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
- netapp
- snmpnetapp
- snmpnetappsystemhealthsensor
For more information about basic sensor settings, see section Sensor Settings.
Setting |
Description |
---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab. |
Graph Type |
Define how this sensor shows different channels:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
---|---|
CPU Load |
The CPU load (%) |
Disks Active |
The number of active disks |
Disks Being Added |
The number of disks being added |
Disks Being Scrubbed |
The number of disks being scrubbed |
Disks Failed |
The number of failed disks This channel has a default limit:
|
Disks Failing Soon |
The number of disks that will fail soon This channel has a default limit:
|
Disks Out Of Date |
The number of disks that are out of date This channel has a default limit:
|
Disks Reconstructing |
The number of disks that are reconstructing |
Disks Reconstructing Parity |
The number of disks that are reconstructing parity |
Disks Spare |
The number of spare disks This channel has default limits:
|
Disks Total |
The total number of disks This channel is the primary channel by default. |
Disks Verifying Parity |
The number of disks that are verifying parity |
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status |
KNOWLEDGE BASE
What security features does PRTG include?
My SNMP sensors don’t work. What can I do?