Device and Sensor Setup > Sensor Settings

Previous Next

PRTG Manual: HTTP Push Data Sensor

The HTTP Push Data sensor displays numeric values from received messages that are pushed via an HTTP request to PRTG. It provides a URL that you can use to push messages to the probe system via HTTP (secured with TLS 1.2 or not secure).

For more information about the sensor usage, see section How to Use.

HTTP Push Data Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: HTTP Push Data
French: Données (HTTP Push)
German: HTTP Push-Daten
Japanese: HTTP プッシュデータ
Portuguese: Dados de push HTTP
Russian: Данные push-объекта HTTP
Simplified Chinese: HTTP 推送数据
Spanish: Datos push (HTTP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Remote probe	If you want to add this sensor to a remote probe and use an HTTPS connection to send push notifications, you must import a Secure Sockets Layer (SSL) certificate into the \cert subfolder of the PRTG program directory on the remote probe. However, this certificate does not have to match the certificate that you use on the PRTG core server. For more information about SSL certificates, see the Paessler website: How to use your own SSL certificate with the PRTG web server
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a low performance impact.
False alerts	This sensor might result in false alerts if the parent probe disconnects from the PRTG core server. In this case, the sensor shows the error message: The latest push message that the sensor received is older than the specified time threshold allows. (code: PE222).
Hosted probe	You cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If you want to use this sensor, add it to a remote probe device.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

HttpPushSensor
PushData
PushSensor

For more information about basic sensor settings, see section Sensor Settings.

HTTP Push

Setting	Description
TLS Settings	Define the security of the incoming HTTP push requests: HTTP (unsecure): Send push messages to the probe system via HTTP (not secure). HTTPS low security (TLS 1.0 to 1.3 and weak ciphers): Send push messages to the probe system via HTTPS. The sensor supports connections secured with TLS 1.0 to TLS 1.3 and weak ciphers. It uses the SSL certificate that is delivered with PRTG or your own trusted SSL certificate that you imported for the PRTG web server. If you install the sensor on a remote probe, make sure that you import the same SSL certificates to the remote probe that you use on the PRTG core server. HTTPS high security (TLS 1.2 to 1.3 and strong ciphers): Send push messages to the probe system via HTTPS. The sensor supports connections secured with TLS 1.2 to TLS 1.3 and strong ciphers. It uses the SSL certificate that is delivered with PRTG or your own trusted SSL certificate that you imported for the PRTG web server. If you install the sensor on a remote probe, make sure that you import the same SSL certificates to the remote probe that you use on the PRTG core server. You cannot change this value after sensor creation.
Port	This setting is only visible if you select HTTP (unsecure) above. Enter the number of the port on which this sensor listens for incoming HTTP requests. The default port is 5050. You cannot change this value after sensor creation.
TLS Port	This setting is only visible if you select HTTPS low security (TLS 1.0 to 1.3 and weak ciphers) or HTTPS high security (TLS 1.2 to 1.3 and strong ciphers) above. Enter the number of the port on which this sensor listens for incoming HTTPS requests. The default port is 5051. You cannot change this value after sensor creation.
Request Method	Select the request method of the webhook: any: Do not use any filter for the request method. GET (default): Select this method if the webhook uses GET. POST: Select this method if the webhook sends POST data. POST data must be form-encoded request bodies with the same parameters as for GET requests.
Identification Token	This is the token that PRTG uses to find the matching sensor for the incoming message. When you create the sensor, this token is {__guid__}. PRTG replaces this token with an automatically generated token after sensor creation. If you want to use a different identification token, you can edit it during or after sensor creation. PRTG does not automatically replace the token if you change it already during sensor creation.
Request Handling	Define what PRTG does with the incoming messages: Discard request: Do not store the pushed messages. Store result: Store the last message received from the sensor in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Request for Sensor [ID].txt. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

HTTP Push Data

Setting	Description
No Incoming Data	Define which status the sensor shows if it does not receive a push message for at least two scanning intervals: Ignore and keep last status (default): Keep the status as defined by the last message that the sensor received. The parent probe must be connected to keep the last status. If the parent probe disconnects, the sensor shows the Unknown status. If the parent probe connects again, the sensor does not automatically switch from the Unknown status to the last status before the parent probe disconnected. Switch to unknown status: Show the Unknown status if the sensor does not receive a message for at least two scanning intervals. Switch to down status after x minutes: Show the Down status if the sensor does not receive a message within a specific time span. Define the time threshold below.
Time Threshold (Minutes)	This setting is only visible if you select Switch to down status after x minutes above. Enter a time threshold in minutes. If this time elapses, the sensor shows the Down status if it does not receive a push message within this time span. Enter an integer. The maximum threshold is 1440 minutes.
Value Type	Define the type of the value of the received data: Integer Float (with a dot . between the predecimal position and the decimal places) If this setting does not match, the sensor shows the Down status.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

How to Use

This function is known as webhook. Basically, a webhook works like a push notification. Webhooks are usually triggered by an event (for example, a new comment on a blog post) and send according information to a specified URL. The HTTP Push Data sensor then displays the data of pushed and received messages.

The HTTP Push Data sensor uses the following URL:

http://<probe_ip>:<port_number>/<token>?value=<integer_or_float>&text=<text message>

Replace the parameters <probe_ip>, <port_number>, <token>, and <integer_or_float> with the corresponding values. The &text parameter is optional: You can omit it.

You can define the port number and identification token in the sensor settings.
The probe IP is the IP address of the probe system with this sensor.
The value can be an integer or a float value depending on the data of your application. You must set the value type accordingly in the sensor settings. This parameter is the sensor value.
If this parameter is missing, the sensor shows a Down status.
You can optionally add a custom text message by replacing the parameter <text message> with your custom text. The text is shown as the sensor message. If there is no value but only a text, the text is shown as an error message.
This text message has to be URL encoded (for example, the whitespaces in the sample URL below). Most browsers do URL-encoding automatically.

Example:

http://192.0.2.0:5050/XYZ123?value=0&text=this%20is%20a%20message

You can use several sensors with the same port and identification token. In this case, the data of push messages is shown in each of these sensors.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.
[Value]	The received value and an optional message in one channel This channel is the primary channel by default.

Channel

Description

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.

[Value]

The received value and an optional message in one channel

This channel is the primary channel by default.

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My HTTP sensors don't work. What can I do?

- https://kb.paessler.com/en/topic/85284

Previous Next

PRTG Manual: HTTP Push Data Sensor

Take Your Monitoring to the Next Level

Take Your
Monitoring
to the
Next Level