PRTG Manual: SNMP HPE BladeSystem Enclosure Health Sensor
The SNMP HPE BladeSystem Enclosure Health sensor monitors the health of an HPE BladeSystem device via the Simple Network Management Protocol (SNMP).
SNMP HPE BladeSystem Enclosure HealthSensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: SNMP HPE BladeSystem Behuizing Status
- French: HPE BladeSystem état du boîtier (SNMP)
- German: SNMP HPE BladeSystem Gehäuse-Zustand
- Japanese: SNMP HPE BladeSystem エンクロージャの正常性
- Portuguese: Saúde do gabinete HPE BladeSystem (SNMP)
- Russian: Работоспособность корпуса HPE BladeSystem по SNMP
- Simplified Chinese: SNMP HPE BladeSystem 外壳运行状况
- Spanish: Salud de gabinete HPE BladeSystem (SNMP)
Consider the following remarks and requirements for this sensor:
Remark |
Description |
|---|---|
Parent device |
This sensor requires that the IP address or Domain Name System (DNS) name in the settings of the parent device points to the HPE BladeSystem Enclosure hosting the Onboard Administrator. |
IPv6 |
This sensor supports IPv6. |
Performance impact |
This sensor has a low performance impact. |
Lookups |
This sensor uses lookups to determine the status values of one or more channels. |
Basic Sensor Settings
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
- blade
- bladesystem
- health
- hpe
- snmp
- systemhealth
For more information about basic sensor settings, see section Sensor Settings.
Sensor Display
Setting |
Description |
|---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how this sensor shows different channels:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click 
under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
|---|---|
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status. |
Enclosure Condition |
The enclosure condition
|
Enclosure Manager Condition |
The enclosure manager condition
|
KNOWLEDGE BASE
What security features does PRTG include?
My SNMP sensors don’t work. What can I do?
