PRTG Manual: Redfish Virtual Disk Sensor

The Redfish Virtual Disk sensor monitors the virtual disk of a Redfish Scalable Platforms Management API (Redfish)-capable server.

Redfish Virtual Disk Sensor

Redfish Virtual Disk Sensor

i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: Redfish Virtuele Schijf
  • French: Redfish disque virtuel
  • German: Redfish Virtueller Datenträger
  • Japanese: Redfish 仮想ディスク
  • Portuguese: Disco físico Redfish
  • Russian: Виртуальный диск Redfish
  • Simplified Chinese: Redfish 虚拟磁盘
  • Spanish: Disco virtual Redfish

Remarks

Consider the following remarks and requirements for this sensor:

Remark

Description

Credentials

This sensor requires credentials for Redfish in settings that are higher in the object hierarchy.

IPv6

This sensor supports IPv6.

Performance impact

This sensor has a very low performance impact.

Lookups

This sensor uses lookups to determine the status values of one or more channels.

Redfish support

Supporters of the Redfish standard include Dell, Eaton, Emerson, Fujitsu, HPE, Intel, Lenovo, NetApp, Supermicro, and VMware.

Multi-platform probe

You can add this sensor to a multi-platform probe.

Knowledge Base

Knowledge Base: I want to know which of my systems support the PRTG Redfish sensors. Can you help me?

Basic Sensor Settings

Basic Sensor Settings

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • logicaldisk
  • redfish
  • virtualdisk
  • virtualvolume

i_square_cyanFor more information about basic sensor settings, see section Sensor Settings.

Redfish Specific

Redfish Specific

Redfish Specific

i_round_blueThe information in the Redfish Specific settings reflects the status of the system at the time of sensor creation. If any setting changes after creation, the Redfish Specific settings do not reflect the change. Add the sensor anew to update the displayed settings.

Setting

Description

Virtual Disk Name

The name of the virtual disk that this sensor monitors.

Capacity

The capacity of the virtual disk that this sensor monitors.

RAID Level

The RAID level of the virtual disk that this sensor monitors.

Physical Disks Count

The number of physical disks connected to the virtual disk that this sensor monitors.

System Name

The name of the system that the virtual disk belongs to.

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Debug Options

Debug Options

Debug Options

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

  • Discard result (default): Do not store the sensor result.
  • Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

i_podThis option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

i_round_blueIn a cluster, PRTG stores the result in the PRTG data directory of the master node.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

i_square_cyanFor more information, see section Inheritance of Settings.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

Capacity

The capacity of the virtual disk

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Physical Disks "Critical"

The number of physical disks in the critical status

i_round_blueThis channel has a default limit:

  • Upper error limit: 0

Physical Disks "Offline"

The number of physical disks in the offline status

i_round_blueThis channel has a default limit:

  • Upper error limit: 0

Physical Disks "OK"

The number of physical disks in the OK status

Physical Disks "Warning"

The number of physical disks in the warning status

i_round_blueThis channel has a default limit:

  • Upper error limit: 0

Virtual Disk Status

The virtual disk status

  • Up status: OK
  • Warning status: Warning
  • Down status: Critical
  • Unknown status: Offline / Absent

i_round_blueThis channel is the primary channel by default.

More

i_square_blueKNOWLEDGE BASE

I want to know which of my systems support the PRTG Redfish sensors. Can you help me?

What security features does PRTG include?