PRTG Manual: Exchange Mailbox (PowerShell) Sensor

The Exchange Mailbox (PowerShell) sensor monitors mailboxes of an Exchange server via Remote PowerShell.

Exchange Mailbox (PowerShell) Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: Exchange Postbus (PowerShell)
French: Exchange boîte aux lettres (PowerShell)
German: Exchange-Postfach (PowerShell)
Japanese: Exchange Mailbox（PowerShell）
Portuguese: Caixa de correio Exchange (PowerShell)
Russian: Почтовый ящик Exchange (PowerShell)
Simplified Chinese: Exchange 邮箱 (PowerShell)
Spanish: Buzón Exchange (PowerShell)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Performance impact	This sensor has a high performance impact. We recommend that you use no more than 200 of this sensor on each probe.
Elevated rights	This sensor requires elevated rights for the user of this sensor on the Exchange system. It is not sufficient to have administrative rights. For more information, see the Knowledge Base: I have problems with the PowerShell Exchange sensors, what can I do? (solution (2) in the reply).
Remote PowerShell and Remote Exchange Management Shell	This sensor requires Remote PowerShell and Remote Exchange Management Shell on the target system and PowerShell on the probe system. Also make sure you have at least PowerShell 2.0 installed on the probe system. In larger environments, the default memory limit for the remote shell might be insufficient. This might result in the error message The WSMan provider host process did not return a proper response. In this case, increase the memory limit for Remote PowerShell. For more information, see the Knowledge Base: How do I enable and use remote commands in Windows PowerShell? and How can I increase memory for Remote PowerShell?
.NET 4.7.2 or later	This sensor requires .NET 4.7.2 or later from Microsoft on the probe system. In a cluster, install it on every cluster node. If the framework is missing, you cannot create this sensor. For more information, see the Knowledge Base: Which .NET version does PRTG require?
Parent device	This sensor requires that the parent device is the Exchange server (as of version 2016) that hosts the database that you want to monitor.
FQDN	This sensor requires the fully qualified domain name (FQDN) of the Exchange server in the settings of the parent device. In the device settings of the Exchange server, provide the FQDN instead of the IP address. For more information, see the Knowledge Base: I have problems with the PowerShell Exchange sensors, what can I do?
Credentials	This sensor requires credentials for Windows systems.
IPv4	This sensor only supports IPv4.
Knowledge Base	Knowledge Base: Where can I find more information about PowerShell sensors?
Hosted probe	You cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If you want to use this sensor, add it to a remote probe device.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

exchange
mailbox
powershell

For more information about basic sensor settings, see section Sensor Settings.

Sensor Settings

Setting	Description
Mailbox Name	The name of the mailbox that this sensor monitors.
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt, Result of Sensor [ID].Data.txt, and Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Mailbox Name

The name of the mailbox that this sensor monitors.

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.
Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt, Result of Sensor [ID].Data.txt, and Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Item Count	The number of items This channel is the primary channel by default.
Last Logon Time	The time since the last mailbox login
Total Item Size	The total size of items