PRTG Manual: SNMP Synology System Health Sensor

The SNMP Synology System Health sensor monitors the system health of a Synology network-attached storage (NAS) via the Simple Network Management Protocol (SNMP).

SNMP Synology System Health Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP-Synology Systeemstatus
French: Synology état du système (SNMP)
German: SNMP Synology Systemzustand
Japanese: SNMP Synology システム正常性
Portuguese: Saúde do sistema Synology (SNMP)
Russian: Работоспособность системы Synology по SNMP
Simplified Chinese: SNMP Synology 系统健康状况
Spanish: Salud de sistema Synology (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.
Knowledge Base	Knowledge Base: Why does my Synology System Health sensor show incorrect CPU and memory values?

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

snmpsynology
synology
systemhealth

For more information about basic sensor settings, see section Sensor Settings.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
CPU Fan Status	The CPU fan status Up status: Normal Down status: Failed
CPU Load	The CPU load (%) For more information about the shown memory and CPU load values, see the Knowledge Base: Why does my Synology System Health sensor show incorrect CPU and memory values?
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.
Memory Free	The free memory (%) For more information about the shown memory and CPU load values, see the Knowledge Base: Why does my Synology System Health sensor show incorrect CPU and memory values?
Power Status	The power status Up status: Normal Down status: Failed
System Fan Status	The system fan status Up status: Normal Down status: Failed
System Status	The system status Up status: Normal Down status: Failed This channel is the primary channel by default.
Temperature	The temperature