PRTG Manual: SNMP Cisco ASA VPN Users Sensor

The SNMP Cisco ASA VPN Users sensor monitors account connections to a VPN on a Cisco Adaptive Security Appliance via the Simple Network Management Protocol (SNMP).

SNMP Cisco ASA VPN Users Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP Cisco ASA VPN Gebruikers
French: Cisco ASA utilisateurs VPN (SNMP)
German: SNMP Cisco ASA VPN-Benutzer
Japanese: SNMP Cisco ASA VPN ユーザー数
Portuguese: Usuários VPN Cisco ASA (SNMP)
Russian: Пользователи SNMP Cisco ASA VPN
Simplified Chinese: SNMP Cisco ASA VPN 用户
Spanish: Usuarios VPN Cisco ASA (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
VPN users	Do not use this sensor to monitor more than 50 VPN users, especially if they are all connected simultaneously. For more information, see the Knowledge Base: My SNMP Cisco ASA VPN Users sensor shows a user limit error. Why? What can I do?
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a low performance impact.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

snmpciscoasavpnsensor
snmpciscoasavpntrafficsensor

For more information about basic sensor settings, see section Sensor Settings.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
[Account]	The account status Up status: Offline, Online
Connected Accounts	The number of connected accounts This channel is the primary channel by default.
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.

Channel

Description

[Account]

The account status

Up status: Offline, Online

Connected Accounts

The number of connected accounts

This channel is the primary channel by default.

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.

KNOWLEDGE BASE