PRTG Manual: SNMP Cisco ASA VPN Connections Sensor
The SNMP Cisco ASA VPN Connections sensor monitors the VPN connections on a Cisco Adaptive Security Appliance via the Simple Network Management Protocol (SNMP).
SNMP Cisco ASA VPN Connections Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: SNMP Cisco ASA VPN Verbindingen
- French: Cisco ASA connexions VPN (SNMP)
- German: SNMP Cisco ASA VPN-Verbindungen
- Japanese: SNMP Cisco ASA VPN 接続数
- Portuguese: Conexões VPN Cisco ASA (SNMP)
- Russian: Подключения SNMP Cisco ASA VPN
- Simplified Chinese: SNMP Cisco ASA VPN 连接
- Spanish: Conexiones VPN Cisco ASA (SNMP)
Consider the following remarks and requirements for this sensor:
Remark |
Description |
|---|---|
IPv6 |
This sensor supports IPv6. |
Performance impact |
This sensor has a very low performance impact. |
Basic Sensor Settings
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
- snmpciscoasavpnconnectionssensor
- snmpciscoasavpnsensor
For more information about basic sensor settings, see section Sensor Settings.
Sensor Display
Setting |
Description |
|---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how this sensor shows different channels:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click 
under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
|---|---|
Active Email Sessions |
The number of active email sessions |
Active IPSec Sessions |
The number of active IPsec sessions |
Active L2L Sessions |
The number of active L2L sessions |
Active LB Sessions |
The number of active LB sessions |
Active Sessions |
The total number of active sessions
|
Active SVC Sessions |
The number of active SVC sessions |
Active Users |
The number of active users |
Active WebVPN Sessions |
The number of active WebVPN users |
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status. |
Groups With Active Users |
The number of groups with active users |
KNOWLEDGE BASE
What security features does PRTG include?
My SNMP sensors don’t work. What can I do?
