PRTG Manual: SNMP interSeptor Pro Environment Sensor
The SNMP interSeptor Pro Environment sensor queries data from a Jacarta interSeptor Pro environmental monitoring system via the Simple Network Management Protocol (SNMP).
SNMP interSeptor Pro Environment Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: SNMP interSeptor Pro Omgeving
- French: interSeptor Pro environnement (SNMP)
- German: SNMP interSeptor Pro Umgebung
- Japanese: SNMP interSeptor Pro 環境
- Portuguese: Ambiente interSeptor Pro (SNMP)
- Russian: Окружающая среда interSeptor Pro по SNMP
- Simplified Chinese: SNMP interSeptor Pro 环境
- Spanish: Entorno interSeptor Pro (SNMP)
Consider the following remarks and requirements for this sensor:
Remark |
Description |
|---|---|
IPv6 |
This sensor supports IPv6. |
Performance impact |
This sensor has a very low performance impact. |
IP address |
To monitor data of an interSeptor Pro device with this sensor, you must add the IP address of your PRTG core server system to Access Control in the interSeptor Pro control panel. Open the interSeptor Pro web interface, select InterSeptor Pro Menu | System Configuration | Access Control, and allow access for the IP address of PRTG. |
Basic Sensor Settings
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
- environment
- interseptor
For more information about basic sensor settings, see section Sensor Settings.
InterSeptor Environment Specific
InterSeptor Environment Specific
Setting |
Description |
|---|---|
Name |
The name of the measuring point that this sensor monitors. |
Measuring Point |
The measuring point that this sensor monitors. |
Sensor Display
Setting |
Description |
|---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how this sensor shows different channels:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click 
under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
|---|---|
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status. |
Humidity |
The humidity (%) |
Temperature |
The temperature |
KNOWLEDGE BASE
What security features does PRTG include?
My SNMP sensors don’t work. What can I do?
