Device and Sensor Setup > Sensor Settings

Previous Next

PRTG Manual: SNMP Fujitsu System Health v2 Sensor

The SNMP Fujitsu System Health v2 sensor monitors the status of a Fujitsu PRIMERGY server via the integrated Remote Management Controller (iRMC) and Simple Network Management Protocol (SNMP). The sensor might also work on other Fujitsu devices that have an iRMC available like PRIMEQUEST servers, some storage systems of the ETERNUS product line, and CELSIUS workstations in racks.

SNMP Fujitsu System Health v2 Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP Fujitsu Systeemstatus v2
French: Fujitsu état du système v2 (SNMP)
German: SNMP Fujitsu Systemzustand v2
Japanese: SNMP Fujitsu システム正常性 v2
Portuguese: Saúde do sistema Fujitsu (SNMP) v2
Russian: Работоспособность системы Fujitsu по SNMP, версия 2
Simplified Chinese: SNMP Fujitsu 系统健康状况版本 2
Spanish: Salud de sistema Fujitsu (SNMP) v2

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
SNMP	This sensor requires SNMP to be enabled in the iRMC via ServerView.
Parent device	Use an iRMC interface as the parent device for this sensor.
SNMP v1	This sensor does not support SNMP v1.
iRMC S5	As of iRMC S5, additional counters for physical disks and logical disks are supported.
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

fujitsu
irmc
snmp
snmpfujitsusystemhealthsensor
systemhealth

For more information about basic sensor settings, see section Sensor Settings.

System Specific

Setting	Description
Measurement	The type of measurement that this sensor monitors.
Sensor Version	The version of the sensor definition that was used to create this sensor.
Identifier	The value that the sensor uses to find the component in the OID table. The identifier has the following format: RowIndex \| Unique \| Measurement. For example, 1.1\|BATT 3.0V\|Voltage.
OID Index	The OID table index that this sensor uses.

Debug Options

Setting	Description
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].Data.txt and Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval. This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.
Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].Data.txt and Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.

This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
CPU Status	The CPU status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Fan Status	The fan status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown
Memory Module Status	The memory module status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown
Overall Status	The overall status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown This channel is the primary channel by default.
Power Supply Status	The power supply status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown
Temperature Status	The temperature status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown
Voltage Status	The voltage status Up status: OK Warning status: Warning Down status: Error Unknown status: Unknown

The sensor can also show CPU speed and core count, fan speed, number of correctable and uncorrectable errors of the memory module, service processor battery status, condition of the power supply, power limit status, and power consumption.

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863

Previous Next

PRTG Manual: SNMP Fujitsu System Health v2 Sensor

Take Your Monitoring to the Next Level

Take Your
Monitoring
to the
Next Level