Device and Sensor Setup > Sensor Settings

Previous Next

PRTG Manual: WMI Terminal Services (Windows 2008+) Sensor

The WMI Terminal Services (Windows 2008+) sensor monitors the number of sessions on a Windows Terminal Services (Remote Desktop Services) server via Windows Management Instrumentation (WMI).

The sensor supports Windows 2008 R2 and later.

WMI Terminal Services (Windows 2008+) Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: WMI Terminal Services (Windows 2008+)
French: Windows (2008+) Terminal Services (WMI)
German: WMI Terminaldienste (Windows 2008+)
Japanese: WMI ターミナルサービス（Windows 2008 以降）
Portuguese: Serviços de terminal (Windows 2008+) (WMI)
Russian: WMI служб терминалов (Windows 2008 и последующая)
Simplified Chinese: WMI 终端服务 (Windows 2008+)
Spanish: Terminal Services (Windows 2008+) (WMI)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Performance impact	This sensor has a high performance impact. Stay below 200 WMI sensors per probe. Above this number, consider using multiple remote probes for load balancing.
WoW64	This sensor requires WoW64 (Windows 32-bit on Windows 64-bit) for target systems that run Windows Server 2016.
Credentials	This sensor requires credentials for Windows systems.
IPv6	This sensor supports IPv6.
Hosted probe	You cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If you want to use this sensor, add it to a remote probe device.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

wmiterminalservicessensor

For more information about basic sensor settings, see section Sensor Settings.

Debug Options

Setting	Description
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt and Result of Sensor [ID].Data.txt. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.
Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt and Result of Sensor [ID].Data.txt. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Active Sessions	The number of active sessions: sessions with a logged in user, including used published applications
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Total Sessions	The total number of sessions (including inactive sessions): inactive sessions can be sessions with a disconnected user that has not logged out or system services using a session For the Total Sessions channel, the sensor returns the number of active and inactive sessions, plus two additional sessions: one for the console, and one for the services. So, the number of total sessions might actually be higher than expected. This channel is the primary channel by default.

Channel

Description

Active Sessions

The number of active sessions: sessions with a logged in user, including used published applications

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Total Sessions

The total number of sessions (including inactive sessions): inactive sessions can be sessions with a disconnected user that has not logged out or system services using a session

For the Total Sessions channel, the sensor returns the number of active and inactive sessions, plus two additional sessions: one for the console, and one for the services. So, the number of total sessions might actually be higher than expected.

This channel is the primary channel by default.

KNOWLEDGE BASE