PRTG Manual: SNMP Dell EqualLogic Physical Disk Sensor
The SNMP Dell EqualLogic Physical Disk sensor monitors a disk in a Dell EqualLogic storage system via the Simple Network Management Protocol (SNMP).
SNMP Dell EqualLogic Physical Disk Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
- Dutch: SNMP Dell EqualLogic Fysieke Schijf
- French: Dell EqualLogic disque physique (SNMP)
- German: SNMP Dell EqualLogic Physikalischer Datenträger
- Japanese: SNMP Dell EqualLogic 物理ディスク
- Portuguese: Disco físico Dell EqualLogic (SNMP)
- Russian: Физический диск Dell EqualLogic по SNMP
- Simplified Chinese: SNMP Dell EqualLogic 物理磁盘
- Spanish: Disco físico Dell EqualLogic (SNMP)
Consider the following remarks and requirements for this sensor:
Remark |
Description |
|---|---|
IPv6 |
This sensor supports IPv6. |
Performance impact |
This sensor has a low performance impact. |
Lookups |
This sensor uses lookups to determine the status values of one or more channels. |
Basic Sensor Settings
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
- dell
- dellequallogic
- snmpdell
For more information about basic sensor settings, see section Sensor Settings.
Dell EqualLogic Specific
Setting |
Description |
|---|---|
Disk |
The physical disk that this sensor monitors. |
Group ID |
The group ID of the physical disk that this sensor monitors. |
Member ID |
The group member ID of the physical disk that this sensor monitors. |
Disk Slot |
The slot number of the physical disk that this sensor monitors. |
Serial Number |
The serial number of the physical disk that this sensor monitors. |
Manufactured |
The production date of the physical disk that this sensor monitors. If this field is empty, the physical disk does not provide information about the date (this depends on the manufacturer). |
Sensor Display
Setting |
Description |
|---|---|
Primary Channel |
Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.
|
Graph Type |
Define how this sensor shows different channels:
|
Stack Unit |
This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so. |
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click 
under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel |
Description |
|---|---|
Bytes Read |
The number of bytes read |
Bytes Written |
The number of bytes written |
Disk Status |
The disk heath status
|
Downtime |
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status |
Failed Transfers |
The number of failed transfers |
KNOWLEDGE BASE
What security features does PRTG include?
My SNMP sensors don’t work. What can I do?
