Device and Sensor Setup > Sensor Settings

Previous Next

PRTG Manual: SNMP Cisco UCS Blade Sensor

The SNMP Cisco UCS Blade sensor monitors the health status of a Cisco Unified Computing System (UCS) blade server via the Simple Network Management Protocol (SNMP).

SNMP Cisco UCS Blade Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: SNMP Cisco UCS Blade
French: Cisco UCS serveur Blade (SNMP)
German: SNMP Cisco UCS Blade
Japanese: SNMP Cisco UCS ブレード
Portuguese: Blade Cisco UCS (SNMP)
Russian: Блейд-сервер SNMP Cisco UCS
Simplified Chinese: SNMP Cisco UCS 刀片
Spanish: Blade Cisco UCS (SNMP)

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

blade
snmpciscosystemhealthsensor
systemhealth
ucs
ucssystemhealth

For more information about basic sensor settings, see section Sensor Settings.

Sensor Settings

Setting	Description
Blade Servers	The blade server that this sensor monitors.
Channel Mask	The available channels for the blade server that this sensor monitors.
Model	The model of the blade server that this sensor monitors.
Serial Number	The serial number blade server that this sensor monitors.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Oper State	The oper status Up status: Config, Diagnostics, Disabled, Discovery, Ok, Pending Reassociation, Pending Reboot, Test, Unconfig Warning status: Bios Restore, CMOS Reset, Decomissioning, Degraded, Maintenance, Power Problem, Restart, Thermal Problem, Voltage Problem Down status: Compute Failed, Compute Mismatch, Config Failure, Diagnostics Failed, Discovery Failed, Inaccessible, Indeterminate, Inoperable, Maintenance Failed, Power Off, Removed, Test Failed, Unassociated, Unconfig Failed
Operability	The operability status Up status: Auto Upgrade, Operable Warning status: Degraded, Unknown Down status: Accessibility Problem, Bios Post Timeout, Chassis Limit Exceeded, Config, Decomissioning, Disabled, Discovery, Discovery Failed, Equipment Problem, Fabric Connection Problem, Fabric Unsupported Connection, Identify, Identity Unestablishable, Inoperable, Link Activate Blocked, Malformed Fru, Not Supported, Peer Comm Problem, Performance Problem, Post Failure, Power Problem, Powered Off, Removed, Thermal Problem, Upgrade Problem, Voltage Problem This channel is the primary channel by default.
Power State	The power status Up status: Off Duty, Ok, On, Online, Power Save, Test Warning status: Degraded, Not Supported, Unknown Down status:Error, Failed, Off, Offline

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108

My SNMP sensors don’t work. What can I do?

https://kb.paessler.com/en/topic/46863

Previous Next

PRTG Manual: SNMP Cisco UCS Blade Sensor

Take Your Monitoring to the Next Level

Take Your
Monitoring
to the
Next Level